PHX-Series可编程交换直流电源供应器，全系列包含16个主要机种，电压及电流涵盖从30V/200A 到 1000V/12A，其单机的输出功率从6kW至12kW，为了满足更多使用者高功率输出的需求如：车用启动马达、电动车辆(EV)及混合动力车(HEV)用电池模块，PHX-Series 搭配同电压的单机进行Master / Slave的控制，因应更高输出功率的需求，PHX-系列机种提供10组并联操作模式，因此本系列机种在并联后的*大电流输出范围可达4000A(Example: PHX 30-400S(F)C的机种*10台)。
PHX-Series可编程交换直流电源供应器的设计是用来满足当今在电源半导体组件或是电源行业所使用之零件在高速应用下对V-I 特性曲线测试的需求，如车用的启动马达(Starter Motor)、混合动力电池模块和功率半导体组件等，在半导体电路设计、电源模块设计及产品检测经常需要使用快速斜率控制的电源供应器来验证其电子零件特性，因此PHX-Series可程序交换直流电源供应器，其内建可调上升或下降斜率，用户可按产品各别的特性进行上升及下降斜之参数设定，以确保产品验证之周延。由于绿能等应用之兴起及日渐普级化，LED组合而成的产品应用非常广泛，因应LED产品其电源导通瞬间所产生的突波，PHX-Series电源供应器的定电流(CC Priority)优先权模式(此为选购件)，可以让使用者在测试时将电源供应器设定在强制定电流模式下动作，以抑制突波的产生。
该电源系列包括16个主要机种型号如下，涵盖二个不同的输出功率， 分别为6kW及12kW，使用者透过并联操作时，可将机器的总体输出功率提生至120kW( 范例: PHX 30-400FC* 10 台可提供120kW)
PHX 30-200S(F)C, 单通道 6kW / 30V / 200A
PHX 30-400S(F)C, 单通道12kW / 30V / 400A
PHX 60-100S(F)C, 单通道 6kW / 60V / 100 A
PHX 60-200S(F)C, 单通道12kW / 60V / 200A
PHX 500-12S(F)C, 单通道 6kW / 500V / 12A
PHX 500-24S(F)C, 单通道 12kW / 500V / 24A
PHX 1000-6S(F)C, 单通道 6kW / 1000V / 6A
PHX 1000-12S(F)C, 单通道 12kW / 1000V / 12A
PHX 30-200S(F)D, 单通道 6kW / 30V / 200A
PHX 30-400S(F)D, 单通道12kW / 30V / 400A
PHX 60-100S(F)D, 单通道 6kW / 60V / 100 A
PHX 60-200S(F)D, 单通道12kW / 60V / 200A
PHX 500-12S(F)D, 单通道 6kW / 500V / 12A
PHX 1000-6S(F)D, 单通道 6kW / 1000V / 6A
Operating Mode (操作模式)
*机种名称有”F“字样才具斜率控制功能,此为选购功能
当机器内部的保护参数设定值被触发时，机器的前面板将自动启动面板锁定功能，以避免待测体在测试的过程遭受到不必要的损坏。
Wire Connection in Series Operation 串聯操作接線示意圖
*本功能仅提供在几种名称有 “F”字样
Output Specifications
Specification/Models
PHX 30-200 S(F)C
PHX 30-400 S(F)C
PHX 60-100 S(F)C
PHX 60-200 S(F)C
PHX 500-12 S(F)C
PHX 500-24 S(F)C
PHX 1000-6 S(F)C
PHX 1000-12 S(F)C
Rated Output Voltage
30V
60V
500V
1000V
Rated Output Current
200A
400A
100A
12A
24A
6A
Rated Output Power
6000W
12000W
Power Source
180 VAC to 242 VAC, 3 phases
Input frequency range
45Hz to 65Hz
Phases
3-phase, 3-wire plus ground. Neutral not used.
Input Current*1
32A
64A
Input Power Factor *2
Above 0.6
Power Efficiency *3
90% or more
Inrush Current (Peak Value)
65A
130A
Note: *1: With rated output power and rated output current *2: With 200V AC input, rated output power, and rated output current *3: With 200V AC input, rated output voltage, and rated output power
Range
0.00V~31.50V
0.00V~63.00V
0.0V~525.0V
0V~1050V
Accuracy *11
0.1% of setting + 5mV
0.1% of setting + 10mV
0.1% of setting + 0.1V
0.1% of setting + 0.2V
Resolution
10mV
0.1V
1V
Load Regulation *4
0.01% of setting + 0.005% of rated output voltage
Line Regulation *5
0.01% of setting + 0.003% of rated output voltage
Ripple (RMS value) *6
< 10 mV
< 50 mV
< 100mV
Noise(p-p value)(Typ) *7
< 100 mVp-p
< 300mVp-p
Temperature Coefficient (Typ.)
± 100ppm/°C
Transient Response Time *8
1ms or less
2ms or less
Output Response Time *9
Rising
200ms ± 20%(rated load) 200ms ± 20%(no load)
500ms ± 20% (rated load) 500ms ± 20% (no load)
Falling
200ms ± 30% (rated load) <1200ms (no load)
500ms ± 30% (rated load) <1200ms (no load)
Remote Sense Compensation Voltage (Sinlge Wire)
5V
Maximum Sink Current
1A ± 20%
2A ± 20%
250mA ± 20%
500mA ± 20%
125mA ± 20%
Residual Voltage when OUTPUT is OFF (TYP)
± 10mV or less
± 25mV or less
± 50mV or less
0.0A~ 210.0A
0.0A~ 420.0A
0.0A~ 105.0A
0.00A~ 12.60A
0.00A~ 25.20A
0.000A~ 6.300A
Accuracy *12
0.5% of setting +0.1A
0.5% of setting +0.2A
0.5% of setting +0.05A
0.5% of setting +5mA
0.5% of setting +10mA
0.5% of setting +3mA
0.5% of setting +6mA
0.1A
10mA
1mA
Load Regulation *10
0.05% of setting + 0.01% of rated output current
0.05% of setting + 0.03% of rated output current
0.05% of setting + 0.005% of rated output current
Ripple (RMS Value) *6
< 200mA
< 400mA
< 100mA
< 10mA
< 20mA
< 5mA
± 200ppm/°C
Note: *4: Measurement at sensing point for 0~100% change in rated load current (Static Load Change) *5: For ± 10% change in input voltage (Static input Change) *6: At measurement frequency band of 20Hz~1MHz (Resistance Loaded) *7: Measured with oscilloscope at measurement frequency band of 20Hz~20MHz *8: Recovery time within 0.1%+10mV of rated output voltage for 50% to 100% abrupt change in rated load current (Dynamic Load Change) *9: Time in which set voltage error is reached within 1% due to setting changes via panel operation or communication control or external analog control. *10: Current change value at the rated output current when load resistance is changed until resistance value outputs 0~rated power (Static Load Change) *11: At output open-circuit and environmental temperature 23°C ± 5°C *12: At output short-circuit and environmental temperature 23°C ± 5°C
Voltmeter
4-Digit Digital Meter
Maximum Display
99.99 V
999.9 V
9999V
Measure Accuracy *13
0.1% of reading +20mV
0.1% of reading +0.2V
0.1% of reading +2V
Temperature Coefficient (Typical Value)
Ammeter
Maximum Display *14
999.9A
99.99A
9.999A
Measure Accuracy *13*14
0.5% of reading +400mA
0.5% of reading +200mA
0.5% of reading +20mA
0.5% of reading +40mA
0.5% of reading +2mA
± 200 ppm/°C
Power Meter
9.999kW
99.99kW
Accuracy *14
Displays the multiplication value of the voltage measurement value and current measurement value.
Measurement Mode
Moving average process can be selected for measurement
*13: At environmental temperature 23°C ± 5°C *14: At stand-alone operation
Over Voltage Protection Circuit
(OVP)
0.30V~33.00V
0.60V~66.00V
5.0V to 550.0V
10V to 1100V
Accuracy *10
0.2% of setting + 50mV
0.2% of setting + 0.5V
0.2% of setting + 5V
Operation
Can select from operations below
• Output OFF by switching stop
• Input switch cut-off (Input switch cut-off turns the power supply's internal input power relays OFF.)
Over Current Protection Circuit
(OCP)
2.0A~ 220.0A
4.0A~ 440.0A
1A~ 110.0A
0.12A~ 13.20A
0.24A~ 26.40A
0.060A~ 6.600A
0.12A~ 6.13.20A
0.6% of setting + 0.5A
0.6% of setting + 1A
0.6% of setting + 50mA
0.6% of setting + 100mA
0.6% of setting + 5mA
Over Temperature Protection Circuit
• Stops switching, shuts off output, and displays alarms if the temperature of the radiating section heat exceeds 90°C due to stopped fan motor, etc.
• Welds temperature fuses, built in the Inrush Limiting Resistors, at 135°C.
Excessive Input Current Protection
50A fuse
100A fuse
100A[U1] fuse
Operational Mode Displays
All modes are displayed with LEDs
OUT ON --------------------------------------------------------------------------- Orange
CV (Constant Voltage)---------------------------------------------------------- Green
CC (Constant Current)---------------------------------------------------------- Green
PRESET (PRESET)-------------------------------------------------------------- Green
FUNC. (when setting functions)---------------------------------------------- Green
REMOTE (During Remote Operation)-------------------------------------- Green
LOCK (in Key Lock state)------------------------------------------------------ Green
Master-Slave Parallel Operation
Able to control a maximum of 10 parallel connected same-voltage model products with one master unit
Master-Slave Series Operation
Able to control a maximum of 2 series connected same model products with one master unit
---
Startup Mode
CV Priority
*Only full-featured "F" type models:
High Speed
10ms
100ms
Medium Speed
300ms
Low Speed
200ms
500ms
CC Priority
*Standard version. "S" type models:
Variable Slew Rate
*Only full-featured "F" type models: Sets the rising and falling rate for each output voltage and output current individually.
CV Slew Rate Range
0.01V/s~60.00V/s
0.1V/s~120V/s
1V/s~1000V/s
1V/s~2000V/s
CC Slew Rate Range
0.1A/s~ 400.0A/s
0.1A/s~ 800.0A/s
0.1A/s~ 200.0A/s
0.01A/s~ 24.00A/s
0.01A/s~ 48.00A/s
0.01A/s~ 12.00A/s
Sequential ON/OFF
* Only full-featured "F" type models: Output ON/OFF of multiple units can be controlled from one sequential master unit simultaneously or with time lag (Setting range: 0.00s to 99.99s for ON/OFF respectively) Note: Special cable is needed for use.
Memory
Saves and loads the set values of the voltage, current, and various functions in memories "A", "B", and "C".
Key Lock
Locks key operation at the front panel.
Variable Internal Resistance (⊿R)
* Only full-featured "F" type model
0~0.15Ω
0~0.075Ω
0~0.6Ω
0~0.3Ω
0~41.7Ω
0~20.8Ω
0~167Ω
0~83Ω
Output Voltage Control
External Resistance
0~10kΩ (B, C Curve), 0~¥Ω (A Curve)
External Voltage
0~10V DC
External Voltage (Insulation)
Output Current Control
Output ON/OFF Control
Normal
Can be controlled at external contact or photocoupler
Insulation
External contact or photocoupler
Input Cut-Off Control
Voltage Monitoring Output
10V DC output (non-isolated) accuracy: 0.5% ± 10mV
10V DC output (isolated) accuracy: 0.5% ± 10mV
Current Monitoring Output
10V DC output (non-isolated) accuracy: 1.0% ± 10mV
10V DC output (isolated) accuracy: 1.0% ± 10mV
Status Output
CV (Constant Voltage), CC (Constant Current), P-ON (Input Voltage Normal)
The 5 points: LEVEL1_ALM (OVP, OCP), and LEVEL2_ALM (Group Alarm) are outputted by a photocoupler insulated open collector.
Between each input and output, input and chassis, output and chassis:
500 Vdc, 20MΩ or more.
1000 Vdc, 20MΩ or more.
Withstanding Voltage
Between input and chassis:
1.5kV AC 1 minute
Between input and output:
3.0kV AC 1 minute
Between output chasis:
1.3kV DC 1 minute
2.4kV DC 1 minute
Relative Ground Voltage
At peak voltage value, within ± 500V (Between output and ground)
At peak voltage value, within ± 1200V (Between output and ground)
Operating Temperature
0 to 50°C
Storage Temperature
-20°C to 70°C
Operating Humidity
20 to 90% RH
Storage Humidity
Other
Do not place in cold environments, and areas with condensation or corrosive gases
External Dimensions *15 W(mm) x H(mm) x D(mm)
430 x 129 x 562
430 x 221 x 562
430 x 129 x 550
430 x 221 x 550
Max. Dimensions(mm) *16
482.6 x 149 x 637
482.6 x 241 x 647
482.6 x 241 x 637
482.6 x 149 x 625
482.6 x 241 x 625
Weight
About 24.0kg
About 43.0kg
About 22.0kg
About 38.0kg
About 20.5kg
About 37.0kg
About 40.0kg
Cooling Method
Forced cooling by fan motor
Output Terminal
Copper Bar (M12 Screw)
Copper Bar (M5 Screw)
Input Terminal
4P Terminal (M6)
Note: *15: Does not include protruding sections *16: Includes handle, dial, rubber legs, and output terminal cover [U1]Fuses fixed.
无锡聚测电子科技主要经营：直流稳压电源、交流电源供应器、数字示波器、模拟示波器、函数/任意波形信号发生器、 数字万用表、频谱分析仪、网络分析仪、数字万用表、频率计数器、逻辑分析仪 、安规测试仪、LCR数字电桥以及各种工具等。 我们坚持技术和服务并重的思想，遵守规范、客观、公正、实事**的原则，信守协议，重质量、求效率。 公司经营理念：服务、品质、诚信“，以**的产品和上等的服务，满足客户的需求，同时注重业务拓展， 努力建立与客户的良好的沟通，坚持以人为本，以信誉与质量求生存。 要经营品牌：美国是德科技（Keysithy）/ 美国泰克（Tektronix） /美国吉时利(Keithley )美国福禄克（Fluke）/ 美国力科（lecroy）/德国罗德与斯瓦茨（R&S）/德国德图(testo)/ 台湾固纬(Gwinstek) /台湾全天（apmtech）/ 北京普源精电（ Rigol ）/常州同惠(tonghui) /深圳鼎阳(siglent) / 优利德、日本日置等。 联系方式：徐经理：18020307895，QQ:510918582